Difference between revisions of "Известные проблемы"
Jump to navigation
Jump to search
(→Плавают обороты на ходу) |
|||
| Line 2: | Line 2: | ||
После разрядки аккумулятора, может слететь калибровка педали газа, если не прошло само, можно поправить так: | После разрядки аккумулятора, может слететь калибровка педали газа, если не прошло само, можно поправить так: | ||
| − | |||
| − | |||
# Turn ignition fully off after a flash or reset | # Turn ignition fully off after a flash or reset | ||
| − | |||
# Turn ignition fully ON, do not start car, do not touch throttle, leave for 20 sec this will allow ECU to perform its diagnostics and calibrations on cam position and throttle position sensors | # Turn ignition fully ON, do not start car, do not touch throttle, leave for 20 sec this will allow ECU to perform its diagnostics and calibrations on cam position and throttle position sensors | ||
| − | |||
# Turn off ignition | # Turn off ignition | ||
| − | |||
# Turn on ignition leave for 20 sec then start car do not touch throttle | # Turn on ignition leave for 20 sec then start car do not touch throttle | ||
| − | |||
# Let car idle for at least a minute and wait till it settles at the normal idle of about 750 RPM, again do not touch throttle. | # Let car idle for at least a minute and wait till it settles at the normal idle of about 750 RPM, again do not touch throttle. | ||
| − | |||
# After normal idle is achieved then drive car. | # After normal idle is achieved then drive car. | ||
[http://www.ft86club.com/forums/showthread.php?p=2511238#post2511238 Оригинал] | [http://www.ft86club.com/forums/showthread.php?p=2511238#post2511238 Оригинал] | ||
Revision as of 13:22, 12 December 2019
Плавают обороты на ходу
После разрядки аккумулятора, может слететь калибровка педали газа, если не прошло само, можно поправить так:
- Turn ignition fully off after a flash or reset
- Turn ignition fully ON, do not start car, do not touch throttle, leave for 20 sec this will allow ECU to perform its diagnostics and calibrations on cam position and throttle position sensors
- Turn off ignition
- Turn on ignition leave for 20 sec then start car do not touch throttle
- Let car idle for at least a minute and wait till it settles at the normal idle of about 750 RPM, again do not touch throttle.
- After normal idle is achieved then drive car.
